Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Riverside Homeowners Choose KraftMaid Construction
We provide Kraftmaid in Riverside construction, repair, and refacing service throughout the area. As an independent KraftMaid service provider, we’re not tied to any manufacturer’s warranty or sales quotas, which means we give you an honest fix-or-replace opinion on every cabinet box and door front we touch. Our crews know the difference between a Vantage and a Durham door style by feel, and we’ve been working on KraftMaid cabinetry in Riverside kitchens, baths, and laundry rooms long enough to know where the failures actually happen. Call (341) 895-1170 for a free estimate on your KraftMaid project.
Riverside homeowners have a particular set of circumstances when it comes to cabinetry. The city’s mix of Craftsman-era homes in the Wood Streets, mid-century ranches in Magnolia Center, and 1990s-2000s stucco tracts means KraftMaid cabinets show up in three different generations of housing stock, each with its own quirks. The dry Santa Ana heat that sweeps through Riverside’s inland valley has a real effect on wood and thermofoil alike. We’ll get into that below, because honestly, it explains a lot of what we fix.
Key takeaways:
- Independent KraftMaid service in Riverside, not a manufacturer-authorized repair shop.
- We work on Vantage, Durham, Lexington, and Benton lines, plus older discontinued series.
- Written price before we pick up a tool. Always.
- 365-Day Done Right Promise: if it’s not done right, we make it right, in writing.
Why Trust Penhallow Remodeling Riverside for Your KraftMaid Construction?
Trevor Nash, the owner of Penhallow Remodeling Riverside, grew up in Los Angeles and picked up his first tool belt in the trade program at Los Angeles Trade-Technical College, where he learned that a good remodel starts with knowing exactly what you’re getting into before you swing a single hammer. He’s spent the better part of two decades working as a General Contractor across the Inland Empire, and his crew has put in real hours on projects throughout Riverside, including jobs in the Arlington neighborhood where older homes have a way of keeping you honest about what’s behind the walls. That background matters when we’re looking at your KraftMaid cabinets, because we’re not just reading the model name off a hinge stamp. We know the construction details that matter: veneer thickness, corner joinery, drawer glide specs, and how each KraftMaid line handles Riverside’s dry heat and seasonal Santa Ana winds.
Every technician who walks into your Riverside home is background-checked and arrives in uniform. You’ll know exactly who’s working in your kitchen. And before any work starts, you get a written price. Not a verbal ballpark, not a range whispered over the phone. A written number you can hold us to. Say the price before the work. Show up in the window we gave. Leave the place cleaner than we found it. That’s The Kingswell Way, operating since 2004, and that’s the standard on every KraftMaid job we do.
Our crews carry the hardware and fasteners specific to KraftMaid cabinetry, so we’re not making a supply-house run for hinges that almost fit. We use authentic KraftMaid hinge plates, drawer glides, and matching edge banding wherever possible. For discontinued series or obsolete hardware, we source proven aftermarket Euro-style hardware that matches the original geometry. We’ll tell you which is which before we install.
Styles & brands we work with
Common KraftMaid Construction Problems We Fix in Riverside
KraftMaid makes a broad range of cabinetry, and like any cabinet line installed in a climate as dry as Riverside’s, certain failures show up again and again. Here are the five we see most often. If any of these sound familiar, call (341) 895-1170, and we’ll give you a straight answer about what’s actually going on.
- Thermofoil delamination on slab-front doors. The Vantage line uses a full-overlay, flat-panel thermofoil door, and in Riverside’s hot, dry summers, that thermofoil can bubble, crack, and peel. Riverside’s 100°F-plus days bake the adhesive layer. Laundry rooms are especially bad because the intermittent humidity from the dryer cycles through heat and saturation. The fix is usually replacing the door fronts, not scraping and re-gluing, because once thermofoil separates, it rarely rebonds cleanly.
- Off-center adjustable shelf pin holes on older production runs. Some KraftMaid runs from years back had shelf pin holes drilled slightly off-center, which means shelves tilt no matter how you adjust the clips. We’ve seen this in Riverside homes where owners just live with a lopsided pantry shelf for years because they think it’s normal. It’s not. We drill original holes shut, redrill on-center, and recolor the repair to match the cabinet interior.
- Drawer glide roller wear on full-extension slides. KraftMaid base cabinets often use full-extension glides with nylon rollers, and those rollers wear down over time, especially in high-use kitchens. The symptom is side-to-side play, then sticking, then a drawer that locks up completely. Sometimes the fix is replacing the glide itself; sometimes the whole drawer box needs re-aligning. We’ll tell you which.
- Hinge plate screws loosening from face-frame particleboard. The Durham and Lexington lines use face-frame construction, and the hinge plates that screw into that particleboard work loose after years of daily opens and closes, especially on high-use base cabinets like the pots-and-pans drawer under the cooktop. The fix is usually a dowel-and-redrill of the screw hole, not a longer screw, because longer screws just chew through more of the same weak material.
- Warped or cracked stiles on doors without finish sealing. Riverside’s dry air pulls moisture out of unfinished or poorly sealed wood, and on Benton recessed doors, that can lead to cracked stiles or a visible gap at the beaded inset. Once wood splits from dryness, the door often can’t be salvaged, but the rest of the cabinet box usually can. We reface with fresh KraftMaid doors when the box is sound.
KraftMaid Parts & Our Repair-vs-Replace Approach
Our first move on any KraftMaid repair is to use authentic KraftMaid parts. That means genuine hinge plates, drawer glides, and edge banding that match what the factory installed. When a series is discontinued, or the original hardware is no longer available, we use aftermarket Euro-style hardware that matches the original geometry exactly. You’ll know which parts go into your kitchen before we start.
We repair a KraftMaid cabinet when the box is structurally sound and the door style is still available. That’s the honest line. If the cabinet sides are solid, the face frame is tight, and only the doors or glides have failed, we fix it. If the box itself is water-swollen or cracking at the joints, we recommend refacing or replacing with current KraftMaid lines. Refacing typically runs $4,000 to $13,000 for a standard 10×10 Riverside kitchen, which is significantly less than a full tear-out and rebuild. Give you a number before we pick up a tool, that’s just how this works. Call (341) 895-1170 if you want to know which side of the line your cabinets fall on.
Our KraftMaid Service Process, Step by Step
When you call Penhallow Remodeling Riverside for a KraftMaid job, here’s what happens, in order.
- 1
Diagnosis. We inspect every cabinet box, door, hinge, and glide. For KraftMaid kitchens in Riverside, we check specifically for thermofoil separation, off-center shelf pins, loose hinge plates, and glide wear. This inspection takes roughly 45 minutes, and we’ll show you what we find as we find it.
- 2
Repair or install. We install or reface using the parts and door styles we agreed on. That includes transferring your original hardware when it’s still good, or replacing it with matched KraftMaid or equivalent hardware. We use shims and levelers to true up boxes on older Riverside floors, because orignal floor settling in pre-1980 homes means the cabinet that looked level forty years ago probably isn’t.
- 3
Test. We open and close every door and drawer on the job before we call it done. Soft-close hinges get adjusted to close flush and quiet. Undermount glides get checked for side-to-side play. Thermofoil seams get checked for edge lift.
- 4
Warranty. Every KraftMaid repair and refacing job carries our 365-Day Done Right Promise, in writing. If something fails inside the guarantee period, we come back and fix it at no charge. Free second visit, no service call fee.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Products We Service & Install in Riverside
We work on the KraftMaid lines that Anaheim Kraftmaid service customers and Riverside homeowners actually have in their homes. That includes Vantage with its full-overlay flat panel and thermofoil doors, Durham with raised-panel classic detailing, Lexington shaker doors in maple and cherry, and Benton with its recessed beaded inset profile. We also service older and discontinued KraftMaid series, which is where most of the parts questions actually come from. We stock common hinge plates, drawer glides, and edge banding locally for faster turnaround on Riverside service calls, and we can order line-specific doors and panels from KraftMaid current production for refacing jobs.
We Also Service These Brands
KraftMaid is a major part of what we do, but we’re not single-brand dependent, and we also offer Kraftmaid service in Ontario and surrounding areas. We install and service Cambria and Silestone countertops, Kohler and Toto fixtures, and Wellborn cabinetry, among other recognized trade brands. If your kitchen or bath has mixed brands, we’ll handle the whole room, not just the KraftMaid pieces.
FAQs: KraftMaid Construction Service in Riverside
Can you reface my existing KraftMaid cabinets instead of replacing them?
Yes, if the cabinet boxes are structurally sound and the existing door style is still available in KraftMaid’s current production. We reface by removing the old doors and drawer fronts, installing new KraftMaid doors and fronts, and covering the face frames with matching veneer, leaving your cabinet boxes in place. Refacing a standard 10×10 Riverside kitchen typically runs $4,000 to $13,000, depending on door style and finish. Call (341) 895-1170 for a written quote, and we’ll tell you whether your boxes are worth refacing or whether full replacement makes more sense.
Do you carry KraftMaid Vantage thermofoil doors as replacements?
We order KraftMaid Vantage thermofoil doors direct from KraftMaid’s current production when your cabinet boxes are worth keeping and the Vantage line still matches what you have. The honest caveat: thermofoil from a new run may not be a perfect color match to doors that have sat in Riverside sun for a decade, so we sometimes recommend refacing all visible fronts at once to keep the finish uniform. We’ll show you samples before you commit to anything.
My KraftMaid drawer glides are sticking. Can you just fix the glides?
Usually, yes. Sticking KraftMaid glides are often a worn roller or a misaligned drawer box, not a full cabinet replacement. We replace the glide with an authentic KraftMaid part or a matched aftermarket equivalent, realign the drawer, and adjust it for smooth full-extension travel. Per-drawer service runs about $120 to $300 including parts and the hinge and glide adjustment, and we’ll call out the price before we start.
Can you match the finish on my older KraftMaid Benton cabinets for a small addition?
We can match it close, but we won’t promise an invisible match on older Benton cabinets, because the original finish has aged, and Riverside’s dry air has a way of shifting wood tone over time. If you’re adding a small cabinet run next to existing Benton cabinets, we’ll order stain-matched doors from KraftMaid and then hand-adjust the finish on site. For anything larger, a full reface is the cleaner path. Either way, the price is in writing before we start.
Do you adjust KraftMaid soft-close hinges, or do you replace them?
We adjust them first. Most KraftMaid soft-close hinges have three axes of adjustment, depth, side, and height, and a realignment is often all a cabinet door needs. If the hinge itself is bent or the internal spring is shot, we replace it with an authentic KraftMaid hinge plate or a matched aftermarket equivalent. We’ll do the adjustment as part of the diagnosis and show you the hinge before we replace it.
How much does KraftMaid construction cost in Riverside?
| Service | Price Range |
|---|---|
| KraftMaid cabinet refacing, typical 10×10 kitchen | $4,000 – $13,000 |
| KraftMaid cabinet installation only, per linear foot | $100 – $250 |
| KraftMaid drawer front replacement + hinge/glide adjustment, per drawer | $120 – $300 |
| Kitchen design and layout for KraftMaid remodel | $500 – $2,000 |
No, that’s not the whole kitchen remodel price. If you’re doing a full kitchen rebuild with KraftMaid cabinets, countertops, and layout changes, Riverside kitchens typically run $14,000 to $45,000 depending on square footage, cabinet line, and countertop material. For an exact number based on your actual kitchen, call (341) 895-1170. Estimates are free.
Book Your KraftMaid Service in Riverside, CA
Whether your KraftMaid cabinet drawer is sticking in a Wood Streets bungalow or you’re ready to reface a whole Arlington kitchen, call (341) 895-1170. We’ll get you a written estimate, answer your questions without sales pressure, and treat your Riverside home like it’s our own job site. That’s how we work.
Written by Trevor Nash, Owner at Penhallow Remodeling Riverside, serving Riverside and surrounding areas.
