Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Belgard Kitchen Remodeling: The Riverside Owner’s Guide
If you’ve got Belgard pavers or wall block in or around your Riverside kitchen and something has failed, cracked, shifted, or worn out, we can match the replacement and handle the install. Belgard kitchen remodeling work in Riverside typically runs $14,000 to $45,000 depending on whether we’re pulling up a failed paver floor, rebuilding an outdoor kitchen island clad in Belgard block, or tying a kitchen remodel into an existing Belgard patio. We stock common Belgard pavers and caps locally, and if we don’t have your exact color or finish on hand, we can usually source it within a few days and give you a written price before any work starts.
The way most Riverside homeowners discover a Belgard part has failed is simple: a paver sinks, a cap stone loosens, an edge restraint gives way, or a section of the kitchen island veneer starts pulling away from the frame. In the hotter months, Riverside’s clay soil expands and contracts enough to push pavers apart at the seams. By the time you notice it, the subgrade underneath has usually been washing out for a while.
Which Belgard Models This Applies To
Belgard has been making concrete pavers and wall systems for decades, and the parts in a Riverside kitchen remodel tend to fall into three buckets: paver flooring (Holland, Mega-Arbel, Mega-Bergerac, and Catalina lines are the ones we see most), wall block (Weston, Dublin Cobble, and BelAir wall units), and caps or coping stones that finish the top of an outdoor kitchen island or seating wall.
The compatibility gotcha we run into more than anything else: Belgard changes names and discontinues colors. A paver you bought as “Holland Stone in Sierra” in 2012 may now be sold under a different finish name, and the dye lot won’t match what’s in your yard. We measure the actual paver dimensions (Holland is typically 60mm thick but comes in 80mm for driveways), match the profile, and order from the current Belgard catalog. Aftermarket equivalents exist, but with Belgard specifically, we’ve seen enough color drift between brands that we recommend staying with OEM pavers when the repair is visible in the kitchen or adjacent patio. For a buried base course, a quality aftermarket paver is fine and costs less.
If you’re not sure what you have, look for the manufacturer’s stamp on the underside of a loose paver, or measure the unit. A 6×9 Holland paver is 60mm thick. A Mega-Arbel paver is 6×6 or 6×12 and 60mm or 80mm. That measurement tells us which series we’re matching before we ever drive to your house.
Styles & brands we work with
Signs Your Belgard Kitchen Remodeling Is Failing
- Pavers are sinking or creating a dip near the sink or island. Usually the base layer (crushed rock compacted under the pavers) was too thin or has eroded from water running off the kitchen edge. This shows up first in Riverside homes with clay-heavy soil that holds water against the base.
- Cap stones on the island or bar top are loose or rocking. The adhesive or mortar joint has failed, or the cap was set on a surface that flexes. Loose caps on a kitchen island are a knuckle-skimmer and need to be reset before someone leans on them.
- Pavers are separating at the joints. In Riverside’s summer heat, sand-filled joints dry out and blow away, then the pavers drift. This is normal wear, but left alone, the pavers start shifting and the pattern goes wavy.
- A low spot is pooling water near the kitchen door or barbecue. The slope has settled. Water that pools against the house or the island base will eventually work its way into the structure or the paver base and make the problem bigger.
- Edge restraints are surfacing or the border row is spreading. The plastic or metal edge holding the pavers in place has failed. When the border row spreads, the whole field starts to drift.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For Belgard work tied to a Riverside kitchen remodel, full paver replacement or new installation on the kitchen’s indoor-outdoor area runs $14,000 to $45,000 as a complete project. A smaller island cap repair or paver section repair typically comes in lower, often in the $800 to $3,000 range depending on how many caps or pavers need resetting and whether we need to re-compact the subbase. The number moves based on square footage, whether we’re matching an existing color, and how much base material has to be excavated and rebuilt.
Every quote from Penhallow Remodeling Riverside includes removal and haul-off of the failed material, any regrading or base work, new bedding sand, the Belgard pavers or caps, joint sand, edge restraints if needed, and the labor. We write the price down before we start, and it doesn’t change unless you add scope. The work carries our 365-Day Done Right Promise: if something shifts or fails within a year, we come back and fix it at no charge.
DIY or Call Us?
You can safely identify the problem: check for pooled water, loose caps, spreading joints, and edge restraint that’s poking out of the ground. You can also measure a loose paver or snap a photo of the manufacturer’s stamp so we know what we’re matching. What you shouldn’t do is start prying up a failed paver section on your own if it sits against a cabinet, island, or door threshold. Pulling pavers without controlling the edge will shift the ones next to it, and re-compacting a base without the right plate compactor leaves you with the same low spot three months later. Matching Belgard pavers to within a shade or two also takes a current catalog and a supplier relationship; dye lots shift, and the paver you find at a big-box store won’t be the same finish. If it’s a single loose cap and you’re handy, resetting it with a construction adhesive is reasonable. For anything that involves the base, the slope, or the pattern, call us at (341) 895-1170 and we’ll price it before we pick up a tool.
FAQs
Belgard pavers themselves will last 25 to 40 years, but the base underneath them in Riverside typically needs attention every 10 to 15 years because the clay soil shifts. If the base was compacted properly at install, the pavers hold. If it wasn’t, you’ll see sinking in the first three to five years. Call (341) 895-1170 if you’re seeing dips, and we’ll tell you whether it’s a base problem or a surface-level fix.
A cracked paver is replaced, not repaired. Concrete pavers crack all the way through when the load exceeds the base support, and patching the top surface never holds. We pop the cracked paver out, check the base underneath, replace the paver with a matching Belgard unit, and re-sand the joints. For an exact quote on a paver swap, call (341) 895-1170.
Most cap repairs and small paver sections take one day. A full kitchen-adjacent paver field with base rebuild in Riverside usually runs three to five days depending on square footage and how much old base has to come out. We’ll give you a written start window before we schedule, and we show up when we said we would.
We stock common Belgard pavers and caps and can source your specific color or finish through our supplier network. You don’t need to order anything yourself. We’ll match the series and dye lot, bring the material, and include it in the written quote. Call (341) 895-1170 and tell us what you have; if we can’t identify it over the phone, we’ll send someone out to measure.
If you have a Belgard floor, island, or wall that isn’t holding up, call Penhallow Remodeling Riverside at (341) 895-1170. We’ll give you a number before we pick up a tool, tell you exactly what’s included, and put the guarantee in writing. That’s just how this works.
Written by Trevor Nash, Owner, Penhallow Remodeling Riverside at Penhallow Remodeling Riverside, serving Riverside and nearby areas.
