Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cambridge Pavers Driveway & Pavers: The Riverside Owner’s Guide
We install and repair Cambridge Pavers driveways, patios, and walkways throughout Riverside, with full driveway installations typically running $7,000 – $18,000 depending on square footage, base condition, and paver style. Most repair calls involving settling, shifting, or cracked pavers can be diagnosed in one visit and often fixed same-day if we’re just pulling and re-bedding individual units. What usually gets homeowners to call us isn’t a mystery: a paver sinks three inches after a rainstorm, an edge row starts spreading into the lawn, or the sand joints wash out and weeds take over the gaps.
Which Cambridge Pavers Models This Applies To
Cambridge Pavers builds their hardscape lines in three main families: the Leading Edge series (entry-level, interlocking concrete pavers), the Maytrx and RoundTable collection (tumbled, old-world finish), and the Sherwood and Coventry lines (larger-format, more contemporary shapes). The part that matters most for repair isn’t the paver itself; it’s the edge restraint and the bedding layer underneath. Cambridge pavers are manufactured to a tighter dimensional tolerance than budget brands, which means a replacement unit from the same series will seat correctly, but a generic hardware-store paver will not. We measure the paver thickness (typically 60mm or 80mm for driveways, 60mm for patios) and match the color blend code stamped on the original packaging or your purchase receipt before ordering.
We are an independent Riverside contractor, not a Cambridge Pavers dealer or affiliate. That said, we order direct from regional hardscape suppliers who carry current Cambridge inventory, which means we can match discontinued blends more often than you’d expect. When an exact match isn’t available, we’ll show you the closest current blend side by side before we install anything.
Styles & brands we work with
Signs Your Cambridge Pavers Driveway & Pavers Is Failing
- Sinking or low spots that hold water after rain. This usually means the compacted base beneath the pavers has eroded or was never thick enough. In Riverside’s clay-heavy soil, poor drainage underneath a driveway will move pavers within two seasons.
- Edge rows spreading or separating from the border. The plastic or aluminum edge restraint has failed or was never staked properly. Once the edge lets go, the whole field starts to drift under vehicle weight.
- Sand joints washing out, leaving gaps between pavers. Riverside’s infrequent but heavy rain events will strip joint sand in low spots fast. Without sand, pavers rub against each other and chip.
- Cracked or chipped pavers in the wheel path. A paver that cracks in the tire track usually signals a soft spot in the base below, not a defective paver. Replacing the unit without fixing the base means you’ll replace it again.
- Weeds or moss growing through the joints. Weeds mean moisture is sitting in the gaps, which means the bedding is holding water. That’s a drainage problem, and it’ll get worse every year.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A spot repair in Riverside (re-bedding 10 – 30 pavers, re-compacting, re-sanding joints) typically runs $400 – $1,200 depending on access and whether we’re fixing the base or just the surface. A full paver driveway installation runs $7,000 – $18,000, with the spread driven by total square footage, paver series, whether we’re excavating an old concrete slab, and base depth needed. We write the price down before any work starts, so the number you approve is the number on the invoice. Every Cambridge Pavers repair or installation from Penhallow includes our 365-Day Done Right Promise: if the pavers shift, sink, or fail within a year, we come back and fix it at no charge. Trever Nash has been doing this long enough to know that a driveway is only as good as the base under it – so we don’t skip the compaction step, ever.
DIY or Call Us?
You can safely check a few things yourself: walk the driveway after a rain and mark any pavers that wobble underfoot, look at whether the edge restraint is visible or buried, and note where water pools. That’s useful information when you call. Re-setting pavers is not dangerous work the way a garage spring is, but the trick is knowing why the paver moved. If you just pull it, add sand, and drop it back in, you’ve bought yourself six months. If you don’t compact the base, it returns. We’ve fixed a lot of weekend warrior paver jobs in Riverside’s Arlington neighborhood, where older homes have settled bases that keep moving. Give us a call at (341) 895-1170 and we’ll tell you whether it’s a one-hour fix or something deeper.
FAQs
A properly installed Cambridge Pavers driveway in Riverside lasts 25 – 40 years, which is longer than poured concrete in this climate because pavers flex instead of crack when the clay soil expands and contracts. The pavers themselves rarely fail; it’s the base and edge restraint that determine lifespan.
Nearly all sunken or spreading sections can be spot-repaired by pulling the affected pavers, re-compacting the base, and re-setting the units. Full replacement is only necessary when the base was never built correctly or drainage problems have washed out large areas. Call (341) 895-1170 for an exact assessment.
Most spot repairs take 2 – 4 hours on site. A full driveway installation takes 3 – 7 days depending on size, excavation, and weather. We’ll give you a real arrival window and a written schedule before we start.
We keep common 60mm and 80mm paver units in neutral blends on the truck for fast repairs, but color-matched Cambridge series pavers are ordered per job from our Riverside suppliers. We’ll match your blend before we schedule the work.
Written by Trevor Nash, Owner, Penhallow Remodeling Riverside at Penhallow Remodeling Riverside, serving Riverside and nearby areas.
