Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Driveway & Pavers: The Riverside Owner’s Guide
ActiveYards driveway and paver components typically run $7,000 – $18,000 installed across most Riverside properties, depending on square footage, existing base prep, and whether you’re replacing a single failed section or the full run. Most homeowners discover a problem the same way: a paver shifts underfoot, a border row starts wandering, or water pools where it never pooled before. We stock compatible ActiveYards edge restraints, base panels, and paver replacement units, and we can usually have your repair quoted and scheduled within a few days of the first call.
Here’s the honest truth about ActiveYards systems in Riverside: the California sun and our clay-heavy soil do more damage than the pavers themselves. UV exposure fades and embrittles plastic edge restraints over five to eight years, and our seasonal wet-dry cycles cause the sand base to migrate, which leaves pavers rocking and uneven. The good news is that the aluminum and steel frame components hold up well. It’s almost always the polymer edging, joint sand, or base compaction that fails first, not the paver itself.
Which ActiveYards Models This Applies To
ActiveYards manufactures driveway and paver products under a few distinct lines, and matching the right part matters. The main compatibility point is the edge restraint profile: older ActiveYards runs used a 3/4-inch lip, while newer systems use a 1-inch spike-and-slot design. If you grab the wrong one, the restraint won’t seat against the paver edge, and you’ll be fighting it all afternoon. Look for a stamped part number on the underside of any loose paver or on the inside face of the edge rail. Most ActiveYards pavers carry a two- or three-letter series code followed by dimensions: something like AY-60 or PA-24. Take a photo of that stamp before you call anyone. It saves a second trip and a wrong order.
We can source OEM ActiveYards parts when the series is still in production. For discontinued profiles, quality aftermarket equivalents from Belgard and Unilock often match the dimensions within an eighth of an inch, and we’ve used them on Riverside jobs where the original part simply isn’t made anymore. We’ll tell you which route makes sense for your project before you spend a dollar. Penhallow Remodeling Riverside is an independent service provider and not affiliated with ActiveYards, which means we’re free to recommend the part that actually fits your driveway, not the one a manufacturer wants us to push.
Styles & brands we work with
Signs Your ActiveYards Driveway & Pavers Is Failing
- Pavers rocking underfoot. This is base erosion. Water has worked its way under the paver and washed away the bedding sand. In Riverside’s clay soil, this happens faster than you’d think, especially along driveway edges where irrigation overspray keeps the ground damp.
- Edge restraints pulling away or curling. The polymer spikes that anchor the restraint into the base have snapped, or UV exposure has made the plastic brittle. Once the restraint lets go, the outer row of pavers starts drifting within a season.
- Low spots holding water after rain. The base wasn’t compacted evenly, or a section has settled. Riverside gets just enough winter rain to make this visible, and standing water accelerates every other problem on the list.
- Weeds or grass pushing through joints. Joint sand is gone or was never installed to full depth. Weeds in the seams mean the pavers aren’t locked together laterally, which leads to shifting under vehicle weight.
- Gaps widening between pavers along the drive path. Vehicle tires push pavers outward over time, especially on sloped driveways common in the Arlington and Canyon Crest neighborhoods. If gaps grow past a quarter inch, the locking system has failed and the run needs re-setting.
Replacement Cost & What’s Included
For ActiveYards driveway and paver work in Riverside, installed pricing breaks down like this:
- Partial repair (single failed section, edge restraint, re-sand): $700 – $2,500
- Full paver driveway installation: $7,000 – $18,000
- Full driveway replacement (tear-out, base re-compaction, new pavers): $5,000 – $14,000
- Paver patio installation (ActiveYards-compatible): $3,500 – $11,000
What drives the range: existing base condition, paver count, access for equipment, and whether the old sand can be re-used or needs full replacement. On most Riverside lots, the base needs more work than the pavers do. We give you a written price before any work starts, and that number does not change at the door. Every paver job includes our 365-Day Done Right Promise in writing: if a paver shifts or a restraint fails within a year, we come back and make it right at no charge. No service call fee, no re-inspection fee.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There are a few things you can safely check on your own. Walk the driveway after a rain and mark low spots with chalk. Inspect the edge restraints for cracks or pulled spikes. Clear debris from the joints and take photos of the paver stamps I mentioned above. That’s useful information to have before you call.
Where DIY goes wrong is the base work. Re-compacting a driveway base requires a plate compactor, a laser level, and enough experience to know when the soil has actually locked up. If you re-set pavers on a soft base, they’ll shift again within months, and you’ll have spent a weekend learning what we already know. If your pavers are shifting or your restraints have failed, call us at (341) 895-1170. We’ll tell you exactly what’s going on and what it costs to fix. Give you a number before we pick up a tool, that’s just how this works.
FAQs
With proper base compaction and maintained joint sand, ActiveYards pavers last 20 to 30 years in Riverside. The pavers themselves rarely fail; it’s the edge restraints and sand base that need attention every five to eight years. Call (341) 895-1170 if you’re seeing shifting or settling, and we’ll assess whether you need a repair or a full re-set.
Yes, in most cases. If the pavers are intact and the problem is base settlement or failed edge restraints, we can lift the affected section, re-compact the base, re-set the pavers, and replace the restraints. Full replacement is usually only necessary when pavers are cracked or the base was never properly prepared. Call (341) 895-1170 for an honest assessment.
Most single-section repairs take one to two days. Full driveway re-sets or new installations run three to five days depending on the size and whether we’re rebuilding the base from scratch. We’ll give you a defined arrival window and a written price before day one, so you know exactly what to expect. Call (341) 895-1170 to schedule a free estimate.
We keep common ActiveYards edge restraints, joint sand, and frequently used paver profiles stocked on our trucks for Riverside jobs. For less common sizes or discontinued series, we order direct or match with a quality Belgard or Unilock equivalent within a day or two. Call (341) 895-1170 with your paver’s series code and we’ll confirm availability on the spot.
Get Your Free Riverside Estimate
If your ActiveYards driveway is shifting, settling, or losing its edge, call Penhallow Remodeling Riverside at (341) 895-1170. We also carry parts and replacement options for KraftMaid cabinetry, Cambria and Silestone countertops when your paver project turns into a broader exterior or interior refresh. Trevor Nash and the crew will take a look, give you a written number, and stand behind the work for a full year. A real person answers the phone, every time.
Written by Trevor Nash, Owner, Penhallow Remodeling Riverside at Penhallow Remodeling Riverside, serving Riverside and nearby areas.
