Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Riverside Owner’s Guide
KraftMaid kitchen remodeling in Riverside typically runs $14,000 – $45,000 for a full remodel, and if you’re reading this, you likely have a KraftMaid cabinet, hinge, drawer glide, or door that’s failed or is failing. We keep KraftMaid-compatible hardware and replacement parts on our trucks, and most hinge or drawer slide replacements are a one-visit fix. The telltale signs are usually the same: a cabinet door that won’t stay closed, a drawer that grinds or sticks, or a finish that’s delaminating around the sink base. That last one is common in Riverside homes, where hard water and summer heat work on cabinet finishes year after year.
Which KraftMaid Models This Applies To
KraftMaid has shifted its line over the years, and while current production runs through cabinet dealers and big box stores, there are still thousands of kitchens in Riverside built with older KraftMaid cabinetry. The good news: most KraftMaid cabinet boxes use standard 35-millimeter European hinge cups and standard drawer glide widths, so a failed hinge doesn’t mean a new kitchen. The gotcha is the hinge plate spacing on certain KraftMaid frameless lines from the mid-2000s. Those cabinets sometimes used a 9-millimeter offset on the mounting plate rather than the more common 3-millimeter or 6-millimeter offset. Get that wrong and the door sits proud or won’t align. We carry all three offsets and can match yours on site.
When a homeowner calls us about a failing KraftMaid part, we ask them to check the inside of the cabinet door. KraftMaid stamps or labels most door hinges and drawer boxes with a date code and sometimes a series identifier. If that label is gone, we measure the hinge cup diameter and the screw spacing. That’s usually enough to identify whether you need an OEM KraftMaid replacement or a quality aftermarket equivalent. In our experience, the Blum and Salice hardware that KraftMaid used in most lines from the 1990s onward is still available, and the aftermarket versions from those same manufacturers often outlast the original. We’re an independent installer and parts provider, not affiliated with KraftMaid. But we stock the hardware that fits their cabinets, and we’ve been matching parts for Riverside homeowners long enough to know which years used which specs.
Styles & brands we work with
Signs Your KraftMaid Kitchen Remodeling Is Failing
- A door that drops or won’t stay closed. The hinge spring or the hinge cup has worn out. KraftMaid doors are heavier than many stock cabinet doors, especially the raised-panel solid hardwood lines, so the hinge takes real punishment over 10 to 15 years.
- A drawer that grinds, sticks, or tips when you pull it. The nylon rollers or ball-bearing slides have flat-spotted or the glide rails have bent. Riverside’s dry, dusty summers accelerate wear on drawer hardware, and that fine grit works its way into the slide tracks.
- Peeling or bubbling finish near the sink, dishwasher, or range. Steam and moisture have compromised the clear coat or the veneer. This is the part most owners mistake for needing a full cabinet replacement. In many cases, the cabinet box is sound and the door or face frame can be refinished or matched with a KraftMaid replacement door.
- A cabinet box pulling away from the wall or sagging in the middle. The mounting screws or the corner gussets have failed, or the cabinet wasn’t secured to studs correctly in the first place. In older Riverside homes, especially in the Arlington neighborhood, we’ve opened up walls and found cabinets hanging on drywall anchors, not studs. That’s a fix we make right the first time.
- Soft-close mechanisms that slam or won’t engage. The damper inside the hinge or the slide has leaked or worn out. KraftMaid’s soft-close hardware is a friction damper, and once it’s spent, the whole hinge or slide usually gets replaced, not repaired.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
If you’re replacing a handful of hinges or a couple of drawer glides, you’re usually looking at $40 – $120 per cabinet for parts and labor in Riverside, depending on the hardware and how many doors we’re adjusting. If the failure is widespread across the kitchen, say 10 or more doors and drawers, you’re in the $500 – $1,800 range for a full hardware refresh and alignment. If the issue is water damage to cabinet boxes or doors, you may be looking at partial cabinet replacement. For full kitchen remodels in Riverside, plan on $14,000 – $45,000 depending on cabinet line, countertop material, and whether you’re changing the layout.
Every job gets a written price before we start. The number we hand you is the number on the invoice. No change orders unless you ask for something extra, and if we hit a surprise behind the wall, we’ll show you what we found before we spend another dollar of your money. The work carries our 365-Day Done Right Promise: if something fails inside the guarantee window, we come back and fix it at no charge. That’s in writing, every time.
DIY or Call Us?
You can check a few things yourself before you call. Open the suspect door and look for a stamped code on the hinge. Test the drawer by lifting it and see if one side moves more than the other. Snap a photo of the hardware with your phone. That helps us tell you over the phone whether it’s a $60 fix or something bigger. What we don’t recommend is trying to adjust or replace cabinet hardware with a screwdriver and a good guess if the hinge plates are wallowed out, the cabinet box isn’t square, or the door has water damage. We’ve followed more than a few DIY hinge replacements in Riverside where the homeowner stripped the cup holes or split the door stile. that turns a 20-minute repair into a door replacement. Give us a call at (341) 895-1170. We’ll tell you what you’re likely looking at before we even schedule the visit.
FAQs
A properly installed KraftMaid cabinet box can last 30 years or more, but hinges and drawer slides typically need replacement at the 12 to 18-year mark in Riverside, where hard water, summer heat, and dry dust shorten hardware life compared to coastal climates.
Most failed hinges get replaced, not repaired, because the internal spring or damper isn’t serviceable. But if the hinge is fine and the screw holes are stripped, we can often plug and redrill the holes and save the original hardware. Call (341) 895-1170 and we’ll tell you which situation you’re in.
For a handful of hinges or drawer slides, we’re usually in and out of a Riverside kitchen in one to two hours. A full hardware refresh across a large kitchen may take half a day. Either way, we’ll give you a written arrival window and a firm price before we touch a single screw.
We stock the most common KraftMaid-compatible hinges, drawer glides, and soft-close dampers on our trucks, along with mounting plates in the three standard offsets. Unusual finishes or older door styles may require a special order, which we’ll price and schedule with you before placing it. We also keep parts and materials for Cambria, Silestone, and Kohler products in the same kitchen line.
Written by Trevor Nash, Owner, Penhallow Remodeling Riverside at Penhallow Remodeling Riverside, serving Riverside and nearby areas.
